Reading and critically analyzing academic research in journal articles is an imp

Reading and critically analyzing academic research in journal articles is an important part of learning and applying scholarly research for multiple applications within your discipline. The first four weeks of this course discussed the various components of research design. Your final assignment is an academic research article critique. The purpose of this critique is to ensure that you know how to read and critically assess research for use in your own research, https://academicessays.xyz/education-homework-help/the-planning-of-an-instructional-design-project-requires-a-scope-of-work-schedu/ understand social problems in society, support decision-making in public policy, or to influence one’s own individual research.
For this final assignment, read and critically review one of the journal articles listed below:
“Experiences of Intimate Partner and Neighborhood Violence and Their Association With Mental Health in Pregnant Women”
“An Investigation of the Influence of the Spatial Distribution of Neighborhood Violent Crime on Fear of Crime”
“Military Service and Lifetime Arrests: Examining the Effects of the Total Military Experience on Arrests in a Sample of Prison Inmates”
“Gender Differences on the Road to Redemption”
“Afterschool School Triathlon Training for 11- to 14-year Old Girls: Influences on Academic Motivation and Achievement”
“The Effect of Social Support, Gratitude, Resilience and Satisfaction with Life on Depressive Symptoms Among Police Officers following Hurricane Katrina”
“Economic Sanctions and the Dynamics of Terrorist Campaigns”
“‘Gimme Shelter’: The Role of Democracy and Institutional Quality in Disaster Preparedness”
“Subcultural Boundary Maintenance in a virtual community for body modification enthusiasts”
“A Snapshot on the Daily Sedentary Behavior of Community Dwelling Older African American Women”
“Institutional Factors and Processes in Interagency Collaboration: The Case of FEMA Corps”
Next, apply the methods detailed in Using a Scientific Journal Article to Write a Critical Review (Links to an external site.) to critique the article you selected. At a minimum, the critique should include the following information:
Introduction (about two pages): Summarize the article you chose, including the purpose of the study, the methodology utilized, the results obtained, and the conclusions drawn by the author(s) utilizing questions posed in the reading. https://academicwriterblog.com/writing/im-working-on-a-writing-question-and-need-support-to-help-me-study-the-video/ Utilize questions posed in the “Analyze the Text” section of Using a Scientific Journal Article to Write a Critical Review (Links to an external site.) to develop this section.
Body (about five pages): Highlight the quality of the research article (both the strengths and weaknesses) as expressed through each section of the paper (i.e., introduction, methods, results, discussion, overview). Use questions posed in the “Evaluate the Text” section of “Using a Scientific Journal Article to Write a Critical Review (Links to an external site.)” to develop this section. Follow the “Evaluate the Text” prompts and include the following:
Critique whether the researcher used the appropriate and ethical application of research methods in relation to their research goals.
Assess whether the application of quantitative methods approaches, qualitative methods approaches or a combination (mixed methods) was appropriate in the article research.
Interpret data and empirical findings in the research through an assessment of the strengths and weaknesses.
Examine the role of the research design in the article by defending or critiquing the research method based on your assessment.
Support the impact of the research by determining if it benefits social policy, theoretical knowledge, or both.
Conclusion (about three pages): https://academicwriterblog.com/management/im-working-on-a-management-project-and-need-support-to-help-me-understand-bette-2/ Discuss the significance of the research. Utilize questions posed in the “Establish the Significance of the Research” section of Using a Scientific Journal Article to Write a Critical Review (Links to an external site.) to develop this section.
The Academic Research-Article Critique paper
Must be 10 double-spaced pages in length (not including title and references pages) and formatted according to APA style as outlined in the Writing Center’s APA Style (Links to an external site.) resource.
Must include a separate title page with the following:
Title of paper
Student’s name
Course name and number
Instructor’s name
Date submitted

Exam: 186081RR – PRINT-READING SYMBOLS AND ABBREVIATIONS you have seen the entir

Exam: 186081RR – PRINT-READING SYMBOLS AND ABBREVIATIONS
you have seen the entire question and all the answers before choosing an answer.
1. When a print needs more information, a table called a _______ shows details about doors, windows, plumbing and
electrical sizes, and model numbers.
A. schedule
B. ladder diagram
C. schematic
D. controller
2. The most common thread type used today for nuts, bolts, and screws is the _______, which uses V-shaped grooves.
A. Modified Worm
B. Unified National
C. ACME thread
D. Sharp V thread
3. In the figure above, the equipment marked D1–10 is a
A. ceiling diffuser.
B. louver opening.
C. return air duct.
D. fan with a belt-driven motor.
4. Referring to the figure above, the unenergized condition of
A. switch PB1 and contact OL is closed.
B. contacts M1 and OL are open.
C. switch PB1 and contact M1 is open.
D. contacts M2 and CR1 are closed.
5. Prints for electrically controlled hydraulic systems are divided by function. One print is for the fluid-control system, and a
(n) _______ is for the electrical wiring.
A. output device
B. flow configuration
C. ladder diagram
D. variable displacement print
6. In the figure above, how many convenience outlets are shown inside the room on the print?
A. Two
B. Three
C. Four
D. Six
7. Referring to the figure above, how far below the finished floor is the top of the footing?
A. 3’–0″
B. 2.0″
C. 5
1
/ 2

D. 4’–0″
8. A(n) _______ included in a set of prints cuts the building horizontally, showing heating equipment, doors and windows,
and room sizes.
A. plan view
B. ladder diagram
C. site plan
D. orthographic projection
9. Referring to the figure above, the components labeled
A. L1 and L2 represent connections to the power supply.
B. L1 and L2 represent rungs.
C. TS and CR represent circuit grounding points.
D. L1 and L2 represent grounding wires.
10. Pneumatic cylinders operate on the same principle as hydraulics, but are unable to
A. feed information back to a computer.
B. provide the linear, in-and-out motion.
C. be used in robotic applications.
D. generate the force of hydraulics.
11. Referring to the figure above, this part
A. is a casting machined to size and drilled for mounting holes.
B. was through drilled in four locations.
C. wasn’t machined on any surface.
D. is a welded assembly of three machined parts.
12. A bolt on a print is listed as a
1
/
4
–32 without any additional abbreviations. What extra abbreviations would the bolt most
likely have?
A. UNF–2A
B. UNC–2A
C. UNEF–2A
D. UNC–2B
13. Referring to the figure above, the identification 24″ O.C. refers to
A. 24 inches of the referenced component must be coated with metal oxide.
B. the type of steel girders to be used.
C. the reference features being spaced 24 inches between their center points.
D. the original width of the referenced component.
14. A site plan indicates water lines as
A. lines made from a series of long dashes followed by two short dashes.
B. lines made of short dashed lines.
C. a solid line with the letter W spaced periodically in the line.
D. a solid line marked H
2
O.
15. On a site plan for a building layout, surveyors have established an elevation mark on a print that reads REF 596.656′
BM. In this case, BM most likely means
A. a geographic marker on the site.
B. a bill of materials.
C. the elevation of the top of a roof.
D. a reference to a surveyor’s benchmark.
16. Pressurized reservoirs that provide fluid to hydraulic equipment circuits are called
A. output actuators.
B. confined pistons.
C. pneumatic pools.
D. accumulators.
17. In the figure above, to what do the identifiers 400 cfm refer?
A. The hardness standard to which the ducts must conform
B. The type of copper-sheet metal alloy used to make the ducts
C. Airflow of 400 cubic feet per minute
D. The identified components’ model number
18. The horizontal line used in basic welding symbols is called a _______ line.
A. geometric
B. reference
C. leader
D. tail
19. To get a smoother surface finish, use a(n) _______ RMS number next to the machining symbol.
A. larger
B. radial
C. angular
D. smaller
20. The most common thread type used for most fastener applications are _______ threads.
A. common class
B. class 1
C. class 2
D. Class 3

Direct Manipulation Early computer systems relied on command line interfaces to

Direct Manipulation
Early computer systems relied on command line interfaces to perform all actions. Today, the majority of systems use direct manipulation rather than a command line interface. The goal of designing a direct manipulation interface is to make use of the system intuitive to the end user. One industry that has been extremely successful designing intuitive direct manipulation inputs is the video game industry. Most game players are able to learn controls as they play a game and then apply the same controls to similar games. Rarely do they need to read a user manual.
Write a four to five (4-5) page paper in which you:
Describe the three (3) principles of direct manipulation and give examples as to how they are used in video game controls.
Analyze video game-type interfaces and discuss three (3) reasons why video game-type interfaces would not be effective for real-world applications.
Describe at least three (3) advantages of direct manipulation versus command line interfaces.
Evaluate direct manipulation and describe three (3) problems with it.
Use at least three (3) quality resources in this assignment. Note: Wikipedia and similar Websites do not qualify as quality resources.

Questions about IP: 1. What two basic functions does IP implement? 2. What four

Questions about IP:
1. What two basic functions does IP implement?
2. What four key mechanisms does IP use to provide its service?
3. Via what protocol does IP communicate errors?
4. In the IP header, what is the Identification field used for?
5. A number of bits within the IP header are designated reserved or optional; why would these be important in network security?
Questions about TCP:
1. What is the difference between a socket and a connection?
2. What are the five calls the TCP/user interface provides for?
3. What is a passive OPEN request?
4. Describe the three-way handshake.